- Products
- Sales Channels
- Resources
- Request Info
- About Us
- Contact Us
- Search
- Home
AutoSplice
The Top Reasons
- Open design gives visual confirmation of proper installation.
- Shark-like opposing cable gripper design.
- Exceeds ANSI C119.4 requirement for a full tension Class A connector.
- Overheating risk averted through use of highly conductive alloy and greater surface contact area.
- Open design prevents corrosion.
- Can be removed and reset to adjust wire sag.
- Factory applied inhibitor.
- Full-current rated at 5% of RBS.
The CPI AutoSplice is the user-friendliest way to splice AAC or ACSR conductor. CPI offers the first Automatic splice design that allows the installer to visually see when the wire has been fully inserted. This open design also prevents moisture from becoming trapped within the splice body causing corrosion. The CPI Auto Splice raises the bar by using a patented opposing cable gripper design that enables this splice to exceed the ANSI C119.4 requirements for ACSR cable.
|
Part # |
Name |
Wire Dia. Range |
Wire Description |
|
S500 |
MIGHTY MINNOW |
.184-.257 |
#6AAC/ACSR #4AAC/ACSR |
| S750 | SNAPPER | .250"-.316" | #4 ACSR/AAAC #2 AAC/ACSR/AAAC |
|
S1000 |
PIRANHA |
.298-.420 |
#2AAC/ACSR #1AAC/ACSR 1/0 AAC/ACSR 2/0 AAC |
| S1500 | MAKO 2 | .414"-.563 | 2/0AAC/ACSR/AAAC 3/0 AAC/ACSR/AAAC 4/0 AAC/ACSR/AAAC |
|
S2000 |
MAKO |
.464-.586 |
3/0AAC/ACSR/AAAC 4/0AAC/ACSR/AAAC 266.8AAC |
|
S3000 |
HAMMERHEAD |
.666-783 |
266.4ACSR/AAAC 336.4AAC/ACSR 397.5AAC/ACSR |
100%
Made In